Skip to content
Goodwood Locksmith ServicesRequest a visit
Open 24/7(289) 212-7829Call now
Illustrative locksmith scene — Udora

Plan ahead High security · Udora

High Security Locks in Udora

You have lost count of how many people have had a key to your house over the years: cleaners, a contractor, a former partner, the previous owner's family. The lock still works, but you no longer know who else it works for.

Call now · open 24/7(289) 212-7829

Request a visit

In plain words

High security locks are cylinders and deadbolts designed to defeat the methods used against ordinary doors. Inside the cylinder a second locking mechanism, usually a sidebar released by finger pins or rotating pins, has to be satisfied at the same time as the normal pin stack, which is what stops picking and bumping. Hardened steel inserts stop drill bits. The bolt is thicker and carries a hardened pin against sawing, and a reinforced strike ties the lock into the wall framing. Just as important, the key is cut on a patented blank that only an authorised person can have copied, so your key count stays known.

Sound familiar?

After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.

How the visit goes

High Security Locks · Udora

How the visit goes

Illustrative locksmith scene — Udora
  1. 1

    The fit of new hardware to old doors

    Older houses in this region have doors that predate modern hardware: narrower stiles, a mortise pocket already cut, a thick slab door or a steel-clad door with a specific backset. The locksmith measures the bore, backset, door thickness and edge preparation so the chosen deadbolt or cylinder fits without hacking at the door. Where a mortise lock is present, a high-security mortise cylinder often replaces the old one directly. Where a knob lock is the only lock, the assessment includes where a new deadbolt bore would sit and whether the frame can take a proper strike.

  2. 2

    Reinforcing the strike and frame

    The strike is where a forced door actually fails, so it gets serious attention. The stamped plate comes off and the pocket is deepened to accept a box strike or a long reinforced strike, fastened with three-inch screws that pass through the jamb into the wall framing. Stripped or split wood is filled and doweled first so the screws have something to hold. Where the frame is thin, a wrap-around reinforcer around the door edge and a full-length jamb plate are options. The result is a bolt that ties the door into the house rather than into a strip of trim.

  3. 3

    Watching the patent calendar

    Patented keyways protect you for as long as the patent lasts. When it expires, blanks may be sold openly and the copy-control layer weakens, though the mechanical resistance of the cylinder stays. The locksmith notes the patent term of your system at handover so the date is not a surprise. Many years before it arrives, the same hardware can usually be moved to a newer patented keyway by changing cylinders and keys while the lock bodies stay. Treat it like a roof: nothing needs doing for a long while, but the date is written down.

In the van

  • Three-inch strike and hinge screws
  • Graded deadbolt with hardened bolt
  • Patented key blanks
  • Key control authorisation card
  • Hardened cylinder guard ring

What affects the quote

  1. 1

    Number of doors

    Each door gets its own cylinder or lock, strike work and testing. Several doors on one keyway share the setup cost of the key system but add hardware and time per opening.

  2. 2

    Retiring the old keyway

    If other doors stay on the old key for now, they may need rekeying so an unknown copy has nowhere to go; that is additional cylinder work alongside the upgrade.

  3. 3

    Master keying

    Arranging staff keys, area keys and a manager key on one system takes bench time to plan and pin, and the more levels you want, the more careful that planning is.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 212-7829

High Security Locks: questions

Advice · (289) 212-7829

Is a high security cylinder really pick proof?

Nothing is beyond a laboratory with unlimited time, so the honest measure is minutes, not absolutes. Rated cylinders are tested to resist skilled picking and impressioning for a set period, and drilling and forcing for another. In the real world that matters because someone at a door has seconds, not a workbench. The sidebar and false grooves in the pins give a picker nothing reliable to feel, and the hardened inserts stop a bit, which is why these attacks move on to easier doors.

Can a hardware store or kiosk copy my new key?

No. The blank for a patented keyway is distributed only through the manufacturer's network to locksmiths who hold the system, and the side milling or angled cuts need a machine set up for that line. A kiosk would have neither the blank nor the cut. Extra keys come through your locksmith, cut from code, once an authorised person has approved the order. That routine is a small inconvenience compared with never knowing who has a copy.

Is a smart lock more secure than a high security mechanical lock?

They solve different problems. A keypad or smart lock manages who can enter and when, and many have no keyway to pick. A high security mechanical lock resists physical attack and controls key copying without batteries, apps or connectivity. Many businesses use both: electronic access on high-traffic doors and high security cylinders on rooms that must hold regardless of power. The locksmith helps you match the tool to each door rather than choosing one philosophy.

High Security Locks near you

Durham, Ontario

Udora information

Town
Udora, Durham, Ontario
In business
13 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

42%

Homes of every age. About 42% of homes in Uxbridge were built in 1980 or earlier, according to the 2021 Census.

Where homes of different generations sit together, additions and renovations are common. A house may have an original front door and a much newer side entry, and bringing both onto the same key and the same standard is a regular job.

81%

Mostly houses. Single-detached houses make up about 81% of homes in Uxbridge (2021 Census).

Families in houses hand keys to children, cleaners, dog walkers and neighbours. A locksmith can set up a keypad on the side door for the household and keep the front door on a conventional key, so access matches how the family actually comes and goes.

Source: Statistics Canada, 2021 Census of Population

Open Udora in Google Maps

Open 24/7

Request a visit

You have lost count of how many people have had a key to your house over the years: cleaners, a contractor, a former partner, the previous owner's family.

Call now · open 24/7(289) 212-7829
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 13 years in business